Page 46 - ITAtube Journal 2 2026
P. 46

Press releases
The value of dual-location measurement
therefore extends well beyond confirming
that the final tube or pipe is within toler-
ance. It provides a detailed understanding
of how the product geometry develops
through the mill and transforms dimen-
sional measurement into an active source
of information for process control, quality
improvement and production optimization.
China’s role in the development of the
new-generation Lut
China has played a central role in the devel-
opment of Tecnar’s latest generation of Lut
systems. In addition to the new Baosteel
order, Tecnar has worked with Daye Special
Steel, Baotou Steel, Jingjiang Jingyu Spe-
cial Steel, Hengyang Valin Steel Tube and
Henan Fengbao Special Steel. Experience
gained at these plants has contributed to
improvements in system reliability, ultra-
sonic performance, measurement range,
signal processing and wall-profile recon-
struction.
to measure tube and pipe wall thickness
without physically contacting the product.
A short laser pulse generates an ultrason-
ic wave at the surface of the hot tube or
pipe, while a separate laser-based optical
receiver detects the echoes returning to
the surface after propagating through the
wall. The high-accuracy ultrasonic time-of-
flight measurement is then converted into
wall thickness using the applicable tem-
perature-dependent acoustic velocity and
real-time processing parameters.
Because both ultrasonic generation and
detection are optical, the measurement
requires no direct mechanical contact with
the material. The Lut gauge can therefore
operate on hot, moving tube and pipe
products under demanding mill condi-
tions, despite the elevated temperatures,
vibration and lateral movement commonly
encountered on seamless tube and pipe
production lines.
As the tube or pipe translates through
the inspection station, the measurement
“Tecnar’s customer base in China has been
highly collaborative throughout the devel-
opment of the new generation of Lut prod-
ucts,” Mr. Nadeau said. “Their operating
experience has helped us extend the meas-
urement range, improve industrial perfor-
mance and address a much wider range of
seamless tube and pipe dimensions.”
The Baosteel contract will increase Tecnar’s
installed fleet of new-generation Lut sys-
tems in China to ten units. To support this
growing base, Tecnar plans to double the
size of its local team by the end of 2026.
This expansion will strengthen local project
execution, commissioning, maintenance
and technical support, while creating a
closer link between Chinese customers and
Tecnar’s engineering and product-develop-
ment teams in Canada. “This permanent
base will establish the infrastructure for
the next 20 years of growth in China,” Mr.
Nadeau said. “The success of these projects
depends on a strong local team working
closely with our innovation and engineering
teams in Canada.”
probes rotate around its circumference
and acquire high-speed, point-by-point
wall-thickness data. These measurements
are combined with information on product
movement to reconstruct the wall-thickness
distribution around the circumference and
along the full length of each tube or pipe.
The resulting information is not limited
to a single average wall-thickness value.
The Lut system provides a more complete
representation of the wall profile, including
localized minimum and maximum values,
giving operators and process specialists
greater visibility into the dimensional re-
sults produced by the mill.
The newest generation of the Lut system
also integrates an outer-diameter meas-
urement system. This added capability
allows wall-thickness and outer-diameter
data to be acquired within the same online
measurement platform and associated with
the same tube or pipe position. Combining
these functions in a single system reduc-
es the overall installation footprint while
providing a more comprehensive assess-
Non-contact ultrasonic measurement of
hot tubes
ment of the finished product and additional
real-time information for quality control,
Tecnar’s Lut system uses laser-ultrason-
process monitoring and automated mill
ics, a non-contact ultrasonic technology,
feedback.46 ITAtube Journal September 2026
   44   45   46   47   48