Page 30 - ITAtube Journal 2 2026
P. 30

Press releases
Boehlerit
Boehlerit – The Partner in bar
peeling
As a partner for successful bar peeling,
Boehlerit offers complete tooling sys-
tems — bar peeling heads, tool holders
and cassettes — as well as tools for bar-
end machining and wire shaving rings.
Bar peeling is a heavy-duty cutting process
that is economically employed in diameter
ranges from 20 up to 500 – 600 millimetres.
With standard materials, feed rates of up to
18 millimetres per revolution are common
today, which represents many times what
is possible in conventional turning. Using
appropriate cassette systems, depths of cut
of up to 15 millimetres can be achieved.
Always at the forefront
Bar peelers benefit from comprehensive
know-how gained from a wide range of
applications and processes when it comes
to achieving performance increases through
new coating developments. In addition, Boe-
hlerit has all coating technologies in-house.
Due to the process conditions—particularly
the extremely high feed rates—the greatest
challenges arise from the required coating
adhesion. Much more than in conventional
turning, application-specific design of cutting
edge geometries moves to the forefront in
bar peeling. In Boehlerit’s portfolio, users
will find the broadest geometry program
available in standard versions, tailored to a
wide range of material classes.
Currently, simulation software is used in
the development of new insert geometries
to analyze chip flow as well as the temper-
atures and forces generated, in order to
achieve the best possible results. A large
number of parameters are fed into the soft-
ware to obtain results that are as close to
reality as possible. The interaction between
cutting material, coating, geometry, and
cutting-edge preparation is usually depend-
ent on the machine and the material to be
machined.
Applications are constantly changing, as new
materials to be machined are continually
being developed and driven by cost savings,
machining allowance—especially for smaller
diameters—is reduced to a minimum before
the peeling process. This aspect presents
particular challenges in terms of roundness
and surface quality. For larger diameters,
this is only possible to a limited extent due
to the manufacturing process, which is why
tandem or trio peeling systems with large
round inserts for high material removal
rates are still used.
Current examples of innovative solutions
for machining new materials or for achiev-
ing significant performance increases in
bar peeling include the development of
new indexable insert grades for machining
carbon steels, the nanotechnology of the
universal peeling turning grade BCP25P, and
the new grades BCP05P, BCP10P, BCP15P,
and BCP35P. In addition, we offer grade
solutions for non-ferrous metals such as alu-
minum and copper. Further information can
be found in our new bar peeling catalogue.
Fig. 1: As a partner for successful bar peeling, Boe-
hlerit offers complete tool systems, i.e. bar peeling
head, holder and cassettes.
30
ITAtube Journal September 2026






















   28   29   30   31   32